dental design 3 shape basic 2 translation

Dental work procedure

Dental bite error

If you look at the bite alignment, 

there's a hole in the scan, the bite has an error.

3Shape should be lowered slightly to lower the bite, 

but the error should be corrected if it is lowered without decreasing.

Usually, use E1 a lot because of its good cost-effectiveness, 

but these days, higher models are sold at a lower price, 

Make sure to purchase after searching thoroughly.

---

DIE Alignment

The DIE is usually well aligned.

There are times when alignment is difficult due to the bubbles

in the die or unnecessary things under the margin.

Make sure you're in a three-point alignment.

Available when the upper portion of the margin on the screen is green or blue.

---

Limit line error

Limit line errors occur frequently in the bridge or anterior region

occurs frequently if scan has an undercut

If you ignore this and proceed, limit line error occurs and

This leads to setup with insertion path and milling failure.

In my opinion, there are various errors in 3shape,

So far, I think it's superior to EXO-CAD or Zirconzan.

---

관련글 보기

캐드캠밀링-아름5x300 가성비로 좋은 밀링기

치과cad/cam 신터링

Denatl.design 3shape hyperdent에 대한 기초 맛보기